RRCP Feature list

Here goes list of all RRCP features with remarks on would it work on specific chip/switch or no.

Feature RTL8326/26s RTL8316B/BP Saves to EEPROM
do scan(REP) + + N/A
do scan(Hello) + + N/A
do reboot + + N/A
do ping + + N/A
show per-port link-status + + N/A
show per-port counters + + N/A
show per-port distance to cable break/short - Maybe* N/A
set VLAN(HVLAN) + + +
set VLAN(port-based) + + -
set VLAN(802.1Q) - + -
set 16-Bit “auth” key + + +
set RRCP port mask + + +
set storm-control + + +
set loop-detect + + +
set IGMP snooping ? + +
set global QoS ? + +
set global MAC learning + + +
set global MAC aging time + + +
set per-port set speed/dumplex + + +
set per-port flow control + + +
set per-port MAC learning + + +
set per-port QoS ? + +
set port trunking(bonding) + + +
set port-mirroring - + -
set switch’s MAC address - + +
read/write EEPROM over network - + +

Showing distance to cable break short

This feature is performed by RTL8208B PHY chip, but RTL8316B/BP is required to access PHY.

Note, that OpenRRCP does not currently support this feature, however, it eventually do.