D-Link DES-1024D HW_rev B1
Description
24-port 10/100 unmanaged switch.
Metal case
Internal AC PSU (100-240V), LEI model SB10-033100-10
Based on RTL8326.
RRCP is disabled out-of-the-box.
EEPROM is absent, but can be soldered in.
Note, that RTL8326 chip implies some restrictions, e.g. there are no 802.1Q VLANs, no port mirroring and no runtime config saving to EEPROM.
Chipset
Switch Controller: RTL8326
PHY: 3x RTL8208
EEPROM: None, empty DIP8 place on PCB.
Photos
Hardware modifications
RRCP enabling by pin-strap
RRCP in DES1024D-HW-B1 can be enabled by strapping a 470 Ohm - 4.7 kOhm resistor between pins 34 and 35. See picture:
Read here for details.